With the development of science and technology and the progress of society, people's quality of life is getting higher and higher, the degree of intelligence in daily life is getting higher and higher, and the requirements for the use of many devices are also increasing. At the same time, with the increase of people raising pets, the issue of pet drinking water has also attracted more and more attention. Water is the source of life and an important substance for many lives to survive. Therefore, it is necessary to ensure the quality of drinking water so that pets can also have a healthy life.
The pet water dispenser in the prior art can realize the circulating filtration of water according to a certain program setting, but it fails to realize the working state of the automatic control device, and the continuous operation in an anhydrous state not only wastes resources, but also will lead to long-term development. It causes relatively large damage to the device, and there is a potential safety hazard.
Regarding the smart pet filter water dispenser, it includes a base, a water storage bucket, a water pump, a water outlet pipe, a water outlet, a control module and a sensor. The water storage bucket is a water storage space and is located above the base. The two are combined by screws. The top of the water bucket is provided with a through hole; the water pump and the sensor are both arranged at the bottom of the water storage bucket, a corresponding circuit board is installed on the base, one end of the water outlet pipe is connected to the water pump, and the other end is connected to the water outlet.
The sensor is connected to the power switch of the water pump through the control module, and includes a first end and a second end. The first end of the sensor is provided with a light-emitting diode and a photosensitive receiver, and the second end of the sensor is provided with a reflector, so The first end and the second end of the sensor are arranged at intervals, and the reflector can reflect the light emitted by the light-emitting diode back to the photosensitive receiver; the control module is respectively connected with the water pump and the sensor, and also includes a water filter tray, a filter element and Filter tray.
